ZyXEL Communications 792H manual Restore Using FTP Session Example, Restore Via Console Port

Prestige 792H G.SHDSL Router

31.3.2 Restore Using FTP Session Example

ftp> put config.rom rom-0 200 Port command okay

150 Opening data connection for STOR rom-0

226 File received OK

221 Goodbye for writing flash

ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec. ftp>quit

Figure 31-8 Restore Using FTP Session Example

Refer to section 31.2.5 to read about configurations that disallow TFTP and FTP over WAN.

31.3.3 Restore Via Console Port

Restore configuration via console port by following the HyperTerminal procedure shown next. Procedures using other serial communications programs should be similar.

Step 1. Display menu 24.6 and enter “y” at the following screen.

Ready to restore Configuration via Xmodem.

Do you want to continue (y/n):

Figure 31-9 System Maintenance – Restore Configuration

Step 2. The following screen indicates that the Xmodem download has started.

Starting XMODEM download (CRC mode) ...

CCCCCCCCC

Figure 31-10 System Maintenance – Starting Xmodem Download Screen

Step 3. Run the HyperTerminal program by clicking Transfer, then Send File as shown in the following screen.

Firmware and Configuration Maintenance 31-9