ZyXEL Communications 792H manual Field Description Example, Yes

Prestige 792H G.SHDSL Router

Menu 1 - General Setup

System Name= ?

Location=

Contact Person's Name=

Domain Name=

Edit Dynamic DNS= No

Route IP= Yes

Bridge= No

Press ENTER to Confirm or ESC to Cancel:

Figure 19-1 Menu 1 General Setup

Fill in the required fields. Refer to the table shown next for more information about these fields.

Table 19-1 Menu 1 General Setup

FIELD	DESCRIPTION	EXAMPLE
System Name	Enter a descriptive name for identification purposes. This name can
	be up to 30 alphanumeric characters long. Spaces are not allowed,
	but dashes “-” and underscores "_" are accepted.
Location (optional)	Enter the geographic location (up to 31 characters) of your Prestige.	MyHouse
Contact Person's	Enter the name (up to 30 characters) of the person in charge of this	JohnDoe
Name (optional)	Prestige.
Domain Name	Enter the domain name (if you know it) here. If you leave this field	zyxel.com.tw
	blank, the ISP may assign a domain name via DHCP. You can go to
	menu 24.8 and type "sys domainname" to see the current domain
	name used by your gateway.
	If you want to clear this field just press the [SPACE BAR]. The domain
	name entered by you is given priority over the ISP assigned domain
	name.
Edit Dynamic DNS	Press the [SPACE BAR] to select Yes or No (default). Select Yes to	No
	configure Menu 1.1 — Configure Dynamic DNS (discussed next).
Route IP	Set this field to Yes to enable or No to disable IP routing. You must	Yes
	enable IP routing for Internet access.
Bridge	Turn on/off bridging for protocols not supported (for example, SNA) or	No
	not turned on in the previous Route IP field. Select Yes to turn
	bridging on; select No to turn bridging off.

19-2 WAN