ZyXEL Communications 792H manual Label Description, Tcp/Ip

Prestige 792H G.SHDSL Router

The following table describes the labels in this screen.

	Table 4-1 LAN
LABEL	DESCRIPTION
DHCP
DHCP	If set to Server, your Prestige can assign IP addresses, an IP default gateway
	and DNS servers to Windows 95, Windows NT and other systems that support
	the DHCP client.
	If set to None, the DHCP server will be disabled.
	If set to Relay, the Prestige acts as a surrogate DHCP server and relays DHCP
	requests and responses between the remote server and the clients. Enter the IP
	address of the actual, remote DHCP server in the Remote DHCP Server field in
	this case.
	When DHCP is used, the following items need to be set:
Client IP Pool Starting	This field specifies the first of the contiguous addresses in the IP address pool.
Address
Size of Client IP Pool	This field specifies the size or count of the IP address pool.
Primary DNS Server	Enter the IP addresses of the DNS servers. The DNS servers are passed to the
	DHCP clients along with the IP address and the subnet mask.
Secondary DNS Server	As above.
Remote DHCP Server	If Relay is selected in the DHCP field above then enter the IP address of the
	actual remote DHCP server here.
TCP/IP
IP Address	Enter the IP address of your Prestige in dotted decimal notation, for example,
	192.168.1.1 (factory default).
IP Subnet Mask	Type the subnet mask assigned to you by your ISP (if given).
RIP Direction	Select the RIP direction from None, Both, In Only and Out Only.
RIP Version	Select the RIP version from RIP-1, RIP-2Band RIP-2M.
Multicast	IGMP (Internet Group Multicast Protocol) is a network-layer protocol used to
	establish membership in a multicast group. The Prestige supports both IGMP
	version 1 (IGMP-v1) and IGMP-v2. Select None to disable it.

LAN Setup 4-5