ZyXEL Communications 792H manual Source and Destination Addresses, None

	Prestige 792H G.SHDSL Router
	Table 10-4 Creating/Editing A Firewall Rule
LABEL	DESCRIPTION
Destination Address	Click DestAdd to add a new address, DestEdit to edit an existing one or
	DestDelete to delete one.
Services	Select a service in the Available Services box on the left, then click >> to select.
	The selected service shows up on the Selected Services box on the right. To
	remove a service, click on it in the Selected Services box on the right, then click
	<<.
Edit Available	Click this button to go to the Customized Services screen.
Service	Refer to Chapter 14 for more information.
Action for Matched	Use the drop down list box to select whether to Block (silently discard) or Forward
Packets	(allow the passage of) packets that match this rule.
Log	This field determines if a log is created for packets that match the rule (Match),
	don't match the rule (Not Match), match either rule (Both) or no log is created
	(None).
Alert	Select the Alert check box to determine that this rule generates an alert when the
	rule is matched.
Apply	Click Apply to save your changes back to the Prestige.
Cancel	Click Cancel to exit this screen without saving.
Delete	Click Delete to remove the current rule.

10.7.1 Source and Destination Addresses

To add a new source or destination address, click SrcAdd or DestAdd from the previous screen. To edit an existing source or destination address, select it from the box and click SrcEdit or DestEdit from the previous screen. Either action displays the following screen.

Creating Custom Rules 10-13