ZyXEL Communications 792H manual Subnet as the remote node

		Prestige 792H G.SHDSL Router
		Table 5-1 WAN Setup
LABEL		DESCRIPTION
Maximum Burst Size	Maximum Burst Size (MBS) refers to the maximum number of cells that can be sent at
	the peak rate. Type the MBS, which is less than 65535.
Login Information	(PPPoA and PPPoE encapsulation only)
Service Name	(PPPoE only) Type the name of your PPPoE service here.
User Name	Enter the user name exactly as your ISP assigned. If assigned a name in the form
	user@domain where domain identifies a service name, then enter both components
	exactly as given.
Password	Enter the password associated with the user name above.
IP Address	A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not
	fixed; the ISP assigns you a different one each time you connect to the Internet. The
	Single User Account feature can be used with either a dynamic or static IP address.
	Select Obtain an IP Address Automatically if you have a dynamic IP address;
	otherwise select Static IP Address and type your ISP assigned IP address in the IP
	Address field below.
IP Address	Enter the static IP address provided.
		For remote node setup, enter the IP address in the same
		subnet as the remote node.
Connection	The schedule rule(s) in SMT menu 26 have priority over your Connection settings.
(PPPoA and PPPoE
encapsulation only)
Nailed-Up	Select Nailed-Up Connection when you want your connection up all the time. The
Connection	Prestige will try to bring up the connection automatically if it is disconnected.
Connect on Demand	Select Connect on Demand when you don't want the connection up all the time and
	specify an idle time-out in the Max Idle Timeout field.
Max Idle Timeout	Specify an idle time-out in the Max Idle Timeout field when you select Connect on
	Demand. The default setting is 0, which means the Internet session will not timeout.

WAN 5-7