ZyXEL Communications 792H manual Bridge Static Route Setup, Remote Node Bridging Options

Prestige 791R G.SHDSL Router

Menu 11.3 - Remote Node Network Layer Options

IP Options:	Bridge Options:
IP Address Assignment= Static	Ethernet Addr Timeout (min)= 0
Rem IP Addr: 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
NAT= Full Feature
Address Mapping Set=2
Metric= 2
Private= No
RIP Direction= Both
Version= RIP-2B
Multicast= IGMP-v2
IP Policies=

Press ENTER to Confirm or ESC to Cancel:

	Figure 26-1 Remote Node Bridging Options
	Table 26-1 Remote Node Bridging Options
FIELD	DESCRIPTION
Bridge (menu 11.1)	Make sure this field is set to Yes.
Edit IP/Bridge (menu	Press [SPACE BAR] to select Yes and press [ENTER] to display menu 11.3.
11.1)
Ethernet Addr Timeout	Type the time (in minutes) for the Prestige to retain the Ethernet Address
(min.) (menu 11.3)	information in its internal tables while the line is down. If this information is
	retained, your Prestige will not have to recompile the tables when the line
	comes back up.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

26.2.2 Bridge Static Route Setup

Similar to IP layer static routes, a bridging static route tells the Prestige the route to a node before a connection is established. Go to menu 12, choose option 3 to see menu 12.3 shown next.

26-2 Bridging Setup