ZyXEL Communications 792H manual Accessing the Prestige Web Configurator to Configure UPnP

Prestige 792H G.SHDSL Router

All UPnP-enabled devices may communicate freely with each other without additional configuration. Disable UPnP if this is not your intention.

16.1.4 UPnP and ZyXEL

ZyXEL has achieved UPnP certification from the Universal Plug and Play Forum Creates UPnP™ Implementers Corp. (UIC). ZyXEL's UPnP implementation supports IGD 1.0 (Internet Gateway Device). At the time of writing ZyXEL's UPnP implementation supports Windows Messenger 4.6 and 4.7 while Windows Messenger 5.0 and Xbox are still being tested.

UPnP broadcasts are only allowed on the LAN.

See later sections for examples of installing UPnP in Windows XP and Windows Me as well as an example of using UPnP in Windows.

16.2Accessing the Prestige Web Configurator to Configure UPnP

Step 1. Make sure your Prestige hardware is properly connected (refer to instructions in Chapter 2).

Step 2. Prepare your computer/computer network to connect to the Internet (refer to the Preparing Your Network portion of the Quick Start Guide).

Step 3. Launch your web browser.

Step 4. Type "192.168.1.1" as the URL.

Step 5. Type “admin” as the user name and "1234" (default) as the password and click OK. The main menu screen displays.

16.2.1 Configuring UPnP

From the navigation panel in the main menu, click UPnP under Advanced Setup to display the screen shown next.

Remote Management 16-2