Bosch Appliances GV2 owner manual Delete User COMMAND, Description, 2.10.2Using DEL USER ?

GV2 Series Control Panels Owner's Manual Supplement

2.10 Delete User [COMMAND 53]

2.10.1 Description

Use this function to delete a personal passcode from your system without assistance from your security company. You must know the user number for the passcode you want to delete.

I have this feature.

I do not have this feature.

2.10.2Using DEL USER ?

1.Ensure that the display shows idle disarmed text.

2.Press the [COMMAND] key. The display shows SYSTEM COMMAND.

3.Press [5] and [3].

You can use the function list in place of steps 2 and 3 to start this function.

1. Press the [MENU] key to enter the function list.

2.Press [NEXT] repeatedly until you reach the DEL USER? prompt.

3.Press [ENT].

4.The display shows DEL USER #. Enter the user number and press [ENT].

5.USER ## (or user text, such as the name of the user, if this feature was programmed into your system by your security company) appears, allowing for confirmation. Press [ENT].

If this is not the user you wish to delete, press the [NEXT] or [PREV] key until the correct user name appears, then press [ENT].

6.The display shows DELETE USER ##?. Press [ENT] to delete user, and USER DELETED appears. If the user number is not in the system, NOT IN USE appears. If you made an error and do not wish to delete this user, press [ESC].

18 Bosch Security Systems, Inc. 2/07 F01U063791-01