Manuals / Runco / TV and Video / Flat Panel Television

Runco CW-61, CW-50XA, CW-42HD Serial Communications, 6.1 RS-232 Connection and Port Configuration

Models: CW-50XA CW-61 CW-42HD

1 66

Download 66 pages 18.25 Kb

Page 55

6. Serial Communications

6. Serial Communications

To interface the CinemaWall with a home theater automation/control system or a PC running terminal emulation software, connect it to your control system or PC as shown in Figure 3-4.

Configure the RS-232 controller or PC serial port as follows: odd parity, 8 data bits, 1 stop bit and no flow control. Set the baud rate 9600, to match that of the CinemaWall RS-232 port.

6.1

RS-232 Connection and Port Configuration

Table 6-1lists the RS-232 command set. Command codes are in hexadecimal format.

Table 6-1. Serial Commands

	Function					Code Data

Power		ON	9FH	80H	60H	4EH	00H	CDH

		OFF	9FH	80H	60H	4FH	00H	CEH

Input		Video1 (RCA)	DFH	80H	60H	47H	01H	01H	08H
Switch
Switch		Video2 (S-Video)	DFH	80H	60H	47H	01H	02H	09H
		Video2 (S-Video)	DFH	80H	60H	47H	01H	02H	09H

		DVD/HD1 (RCA)	DFH	80H	60H	47H	01H	05H	0CH

		DVD/HD2 (RCA)	DFH	80H	60H	47H	01H	06H	0DH

		DVD/HD3 (HDMI)	DFH	80H	60H	47H	01H	0EH	15H

		PC/RGB (DB-15HD)	DFH	80H	60H	47H	01H	07H	0EH

		DVD/HD4 (HDMI)	DFH	80H	60H	47H	01H	1AH	21H

Audio Mute		ON	9FH	80H	60H	3EH	00H	BDH

		OFF	9FH	80H	60H	3FH	00H	BEH

Picture		NORMAL	DFH	80H	60H	0AH	01H	01H	CBH
Memory
Memory		ISF DAY	DFH	80H	60H	0AH	01H	02H	CCH
		ISF DAY	DFH	80H	60H	0AH	01H	02H	CCH

		ISF NIGHT	DFH	80H	60H	0AH	01H	03H	CDH

		CUSTOM1	DFH	80H	60H	0AH	01H	04H	CEH

		FILM	DFH	80H	60H	0AH	01H	05H	CFH

Aspect		VIRTUALWIDE	DFH	80H	60H	51H	01H	02H	13H
Ratio
Ratio		LETTERBOX	DFH	80H	60H	51H	01H	03H	14H
		LETTERBOX	DFH	80H	60H	51H	01H	03H	14H

		STD 4:3	DFH	80H	60H	51H	01H	04H	15H

		ANAMORPHIC	DFH	80H	60H	51H	01H	05H	16H

Computer		ON	DFH	80H	60H	7FH	03H	03H	09H	00H	4DH

		OFF	DFH	80H	60H	7FH	03H	03H	09H	01H	4EH

Cinema		ON	DFH	80H	60H	C1H	01H	01H	82H
Mode
Mode		OFF	DFH	80H	60H	C1H	01H	02H	83H
		OFF	DFH	80H	60H	C1H	01H	02H	83H

Note: Contact your Runco dealer or Runco Technical Support for a complete list of external control codes if needed.

6.2

Serial Command Syntax

Runco CinemaWall Owner’s Operating Manual

45

Image 55

Runco CW-61 Serial Communications, 6.1 RS-232 Connection and Port Configuration, Serial Command Syntax, 1. Serial Commands

Contents

OW N E R ’S OP E R A T I N G MA N U A L CW-42HD CW-50XA CW-61Flat Panel Plasma Display Monitor with Page For Plasma Displays THREE YEAR LIMITED WARRANTYWHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTYRIGHTS, LIMITS AND EXCLUSIONS EFFECTIVE WARRANTY DATEIMPORTANT -- WARRANTY REGISTRATION CONTACT A RUNCO AUTHORIZED SERVICE CENTER TO OBTAIN SERVICERETAIN THIS INFORMATION FOR YOUR RECORDS ADDITIONAL INFORMATIONRUNCO INTERNATIONAL, INC Attn Customer Service Department RUNCO VIDEO-PRODUCT INFORMATIONDOC Compliance Notice Safety PrecautionsInstallation Table of ContentsTHREE YEAR LIMITED WARRANTY Safety PrecautionsOperation Table of ContentsMaintenance and Troubleshooting SpecificationsRunco CinemaWall Owner’s Operating Manual List of FiguresRunco CinemaWall Owner’s Operating Manual List of FiguresIf You Have Comments 1. Introduction1.1 About This Manual Target AudienceDANGER 1.2 Using This Manualcertain features DANGER appears when a given action can cause severe injury orKey Features and Benefits 1.3 Description, Features and BenefitsOptional Accessories Use the safety fittings to fasten the CinemaWall to a wall when3. POWER/STANDBY INDICATOR Controls and IndicatorsFigure 2-1. CinemaWall Controls and Indicators 1. POWER BUTTON 2. REMOTE CONTROL SENSOR5. LEFT/- and RIGHT/+ 6. VOLUME DOWN and UPThe Power on/off switch does not disconnect the plasma display Connectors3. VIDEO1, 2 RCA, S-Video Figure 2-3. CW-50XA and CW-61 Connector Panel1. POWER INPUT 100 to 240 VAC 2. EXTERNAL SPEAKER OUTPUTS8. EXTERNAL CONTROL 9-pin, male D-Sub 2.2 CinemaWall Remote ControlFigure 2-4. CW-42HD and CW-50XA Remote Control 7. DVD/HD3, DVD/HD4 HDMI4. Cursor Keys 1. IR OUTPUT INDICATOR2. ON/OFF 3. MENU4. ASPECT Figure 2-5. CW-61 Remote Control 1. LIGHT2. POWER ON/OFF 3. +12. / EXIT 10. VOLUME +14. OFF TIMER 11. MUTERunco CinemaWall Owner’s Operating Manual Controls and FunctionsNotes on Batteries 3. Installation3.1 Remote Control Notes on Remote ControlInstallation other surfacesThe signal from the remote control can be reflected by walls or installation specialist 3.2 Quick SetupTable 3-1. Installation Overview Installation should be performed by a qualified custom videoon a Wall or Table Stand InstallationConsiderations Mounting the CinemaWallprolong operating life VentilationFigure 3-2. Ventilation Requirements for Enclosure Mounting Other ConsiderationsCinemaWall Connecting theFigure 3-3. CinemaWall Connection Diagram Connections to thea list of computer signals compatible with the CinemaWall. Use video quality because the signal is carried in the digital domainthroughout the entire signal path, from source component output Refer to Computer/Video Signal Compatibility on page 52 forInstallation RS-232 ControllerConnection Figure 3-4. RS-232 Control System ConnectionCable Management Figure 3-5. Installing the Cable ClampsRunco CinemaWall Owner’s Operating Manual Installation4.2 Changing the OSD Language 4.1 Turning on the PowerFigure 4-1. Attaching the Ferrite Cores to the Power Cable 4. Operation4.3 Setting the PC Display Properties 3. The CinemaWall supports 36-bit color 68.7 billion possible colors 4.4 Using the On-Screen MenusAudio Picture AdjustInstall Signal InfoPicture Adjust 1. When you change a picture quality setting, save the change to aMain Menu Figure 4-3. Typical PLUGE Pattern for Adjusting Brightness cyan Figure 4-4. Typical Gray Bar Pattern for Adjusting Contrastgray yellowgreen grayyellow cyanFigure 4-6. Typical Test Pattern for Adjusting Sharpness EXIT RETURN You must set the Advanced OSD option in the Function menu toThe FILM setting is similar to NORMAL but produces a brighter picture Image Options AudioYou cannot assign two or more audio inputs to the same video Note inputAspect Ratio Table 4-1. Aspect Ratio SettingsDescription You must set the Advanced OSD option in the Function menu to Installis set to OFF Language Refer to Changing the OSD Language on pageSECAM This is the standard format used mainly in France and Russia display is turned off, or turned on and not receiving a signal1. If the computer is turned off or not properly connected to the Table 4-2. Power Management IndicationsFunction options in the Function menuthe image size when you turn on the Soften featureLum. Setting AUTO Orbiter AUTO1 Inverse OFF Image Sweep OFF OFF The OSD is always displayed at the same position Signal Info Runco CinemaWall Owner’s Operating Manual OperationImage Options on 5. Maintenance and Troubleshooting5.1 Troubleshooting Tips Table 5-1. Troubleshooting ChartCompatibility on Table 5-1. Troubleshooting Chart continuedMaintenance and Troubleshooting Computer/Video Signal6. Serial Communications 6.1 RS-232 Connection and Port Configuration6.2 Serial Command Syntax Table 6-1. Serial CommandsRunco CinemaWall Owner’s Operating Manual Serial CommunicationsRunco CinemaWall Owner’s Operating Manual 7. Specifications7.1 CinemaWall Specifications Table 7-1. CinemaWall SpecificationsSpecifications are subject to change without notice Table 7-1. CinemaWall Specifications continuedSpecifications Weight with Stand Regulatory Approvals Limited WarrantyCinemaWall DimensionsFigure 7-1. CinemaWall Model CW-42HD Dimensions SpecificationsSpecifications Figure 7-2. CinemaWall Model CW-50XA Dimensions252.34 801.14 103.46 Figure 7-3. CinemaWall Model CW-61 DimensionsSpecifications Runco CinemaWall Owner’s Operating ManualTable 7-2. Computer/Video Signal Compatibility Chart 7.3 Computer/Video Signal CompatibilityRunco CinemaWall Owner’s Operating Manual Table 7-2. Computer/Video Signal Compatibility Chart continuedSpecifications CW-50XA and CW-61 are scaled up or down to that resolutionRunco CinemaWall Owner’s Operating Manual SpecificationsPage rev 09-25-06 RUMA-010975