Runco CW-61, CW-50XA Install, is set to OFF, Language Refer to Changing the OSD Language on page

Operation

		Install ➤
INSTALL
LANGUAGE	:	ENGLISH
DVD/HD1 INPUT :		COMPONENT
D-SUB TYPE	:	RGB
HD TYPE	:	1080i
RGB TYPE	:	AUTO
HDMI	:	LOW
COLOR SYSTEM :		3.58 NTSC
BLANK FIELD	:	GRAY
SIDEBAR ADJ	:	3
S1/S2	:	ON
DISPLAY OSD	:	ON
OSD ADJUST	:	3
REMOTE ID	:	1
FACTORY	:	ON
SEL.	ADJ.	EXIT RETURN

H Size: Use the up- or down-arrow buttons ( , ) to highlight H Size. Then, use the right-arrow button ( ) to increase the width; use the left-arrow button ( ) to decrease it.

Computer (available only on PC/RGB Input): To have the CinemaWall automatically adjust the size, position, and quality of RGB computer images, select Computer from the Image Options menu and set it to ON. To make these adjustments manually, set Computer to OFF.

Fine Picture (available only on PC/RGB Input): Use the Fine Picture control to reduce or eliminate flickering in the image.

Picture Adjust (available only on PC/RGB Input): Use the Picture Adjust control to remove striped patterns from the displayed image.

Note	Fine Picture and Picture Adjust are adjustable only when Computer
	is set to OFF.

You must set the Advanced OSD option (in the Function menu) to

Note ON in order to see all of the items in the Install menu. If you do not,

only the Language and Factory menu items are available. Refer to Advanced OSD on page 40.

Language: Refer to Changing the OSD Language on page 23.

DVD/HD1 Input: Select DVD/HD1 Input from the Install menu to specify the signal format on the DVD/HD1 input. Currently, the only option is COMPONENT.

D-SUB Type: Select D-SUB TYPE from the Install menu to specify the signal format on the PC/RGB input. Currently, the only option is RGB.

HD Type: Select HD Type from the Install menu to specify the resolution (number of vertical lines) of the incoming high definition signal, if necessary.

•Choose 1080i for standard digital broadcasts.

•Choose 1035i for Japanese “High Vision” TV broadcasts.

•Choose 540p for compatibility with certain HDTV receivers.

These are the only resolutions that the CinemaWall does not detect automatically.

RGB Type: RGB Type refers to the incoming RGB signal type. Currently, the only option is AUTO.

HDMI: Select HDMI from the Install menu to adjust the black level of the displayed HDMI signal. Set it to LOW if blacks appear elevated (dark gray). If blacks appear “crushed” (too dark), set it to HIGH.

36 Runco CinemaWall Owner’s Operating Manual