Runco CW-50XA, CW-61, CW-42HD manual 1. Aspect Ratio Settings, Description

Operation

Table 4-1. Aspect Ratio Settings

Aspect Ratio		Description
Anamorphic			Select Anamorphic to view 16:9 DVDs
			and HDTV programs in their native
	16:9 Image on		aspect ratio. 4:3 images are stretched
			horizontally to fit a 16:9 screen.
	16:9 Screen
	4:3 Image on
	16:9 Screen
Standard			Standard 4:3 scales the input signal to fit
			in the center of the 16:9 screen. 4:3 is
			the aspect ratio used by computer
	Active Image		monitors, standard television
	Area (4:3)		programming and most VHS video
			cassettes.
Letterbox			In Letterbox mode, the image is
			stretched vertically; the top and bottom
	Letterbox Image on		portions are “blanked off.” Letterbox is
			best suited for viewing LaserDisc movies
	16:9 Screen
			or non-anamorphic DVDs on a 4:3
			screen.
VirtualWide			A 4:3 image is scaled NON-linearly (more
			on the sides than in the center) to fit a
			16x9 screen.

V Shift: Use the up- or down-arrow buttons ( , ) to highlight V Position. Then, use the right-arrow button ( ) to shift the image up; use the left-arrow button ( ) to shift the image down.

H Shift: Use the up- or down-arrow buttons ( , ) to highlight H Position. Then, use the right-arrow button ( ) to shift the image to the right; use the left-arrow button ( ) to shift the image to the left.

V Size: Use the up- or down-arrow buttons ( , ) to highlight V Size. Then, use the right-arrow button ( ) to increase the height; use the left-arrow button ( ) to decrease it.

Runco CinemaWall Owner’s Operating Manual 35