Runco CW-61, CW-50XA Main Menu, When you change a picture quality setting, save the change to a

Operation

The Main Menu is the starting point for accessing all CinemaWall functions. Main Menu

CINEMAWALL

PICTURE ADJUST

AUDIO

IMAGE OPT

INSTALL

FUNCTION

SIGNAL INFO

Use the controls in the Picture Adjust menu to calibrate your CinemaWall for optimum picture quality.

The CinemaWall has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from Runco video display devices. Accordingly, Runco recommends that setup and calibration be performed by an ISF-certified installation technician.

All signal types require separate processing. Therefore, you need to calibrate each input separately. Runco recommends calibrating the CinemaWall inputs in the following order:

1.Component (DVD/HD1 / DVD/HD2)

2.S-Video (VIDEO 2)

3.Video (VIDEO 1)

4.PC/RGB

5.HDMI (DVD/HD3 / DVD/HD4)

1. When you change a picture quality setting, save the change to a

Note picture memory afterwards. Otherwise, the change will be lost when a different input is selected. (Picture quality settings are

saved for each input and resolution separately.) For information about saving settings, refer to Memory Setting on page 33.

2.Only brightness and contrast controls are available on the PC/RGB input.

SEL. MENU/ENTER OK EXIT EXIT

Picture Adjust

PICTURE ADJUST

MEMORY SETTING	: MEMORY 1
CONTRAST		58
BRIGHTNESS		56
SHARPNESS		52
COLOR		49
TINT		50

VIDEO NR		:	OFF
KELVIN		:	6500K
GAMMA		:	2.2
DITHER		:	AUTO
BLACK LEVEL		:	STEP 1
COLOR CHART
CINEMA MODE		:	ON
PICTURE MEM		:	ISF DAY
SEL.	ADJ.		EXIT RETURN

Runco CinemaWall Owner’s Operating Manual 27