GV2 Series Control Panels Owner's Manual Supplement
For systems with access control, the following prompts are available: ADD CARD?, CHANGE CARD?, and SUB USER ID?. Refer to Systems With Access Control on page 20 for details.
The system does not accept a passcode that is within two digits of an existing passcode. This is to avoid conflicts with duress passcodes. For example, if passcode 123 is already programmed in the system, the system does not accept 121, 122, 124, or 125 as passcodes.
9.ADD LEVEL? appears. If the user number already exists,
CHANGE LEVEL? appears. Press [ENT].
10.VALID AREA 1? appears. If you wish this user number to be valid in Area 1, press [ENT]. If not, press [NEXT].
11.AUTH LEVEL appears. Assign the authority level you wish the user number to have for this area and press [ENT]. Record this information.
12.VALID AREA 2? appears. Enter the information necessary for the areas in the scope of the keypad by following steps 10 and 11 for each area (up to 8 areas).
13.LEVEL ADDED or LEVEL CHANGED appears when all area assignments are made. Press [ENT].
At the end of each function, press [ESC] to return to the ENTER USER # prompt. Press [ESC] again to return to idle text.
Systems With Access Control
If your system includes access control features, such as card readers at doors, the following prompts can appear during the ADD USER? procedure.
ADD CARD? (CHANGE CARD?)
1.If the user has card or token access to the building or area, press [ENT] at the ADD CARD? prompt, or at the CHANGE CARD? prompt if the user already has a card or token.
2.PRESENT CARD appears. Present the card at the card reader and wait for the tone.
3.If the reader identifies the card or token correctly, a tone sounds and the keypad shows CARD ADDED, or CARD CHANGED if the user already has a card or token. Press [ENT].
20 | Bosch Security Systems, Inc. 2/07 |
