Bosch Appliances GV2 owner manual Unlock Door?, Secure Door?

GV2 Series Control Panels Owner's Manual Supplement

2.Enter the number of the door to cycle then press [ENT]. This door cycles and the display changes to reflect the new status of the doors. For example, to cycle Door 3, at the

CYCLE DOOR 1 2 3 4 5 6 7 8 prompt, press [3], then press [ENT]. The display shows CYCLE DOOR 1 2 C 4 5 6 7 8.

This indicates that all doors are in a normal state, except for Door 3, which is cycled.

3.Press [ESC] to leave this sub-function, or enter another door number to cycle.

2.9.4Unlock Door?

1.To unlock a door to allow free access, at the CYCLE DOOR? prompt, press [NEXT] to enter the UNLOCK DOOR? sub- function.

2. The display shows UNLOCK 1 2 3 4 5 6 7 8 if all doors are in a normal state and available. If a door is not in a normal state, the number of the door is replaced with a symbol indicated in Table 3 on page 15.

3.Enter the number of the door to unlock then press [ENT]. This door unlocks and the display changes to reflect the new status of the doors.

For example, to unlock Door 4, at the following prompt, press [4], then press [ENT].

UNLOCK DOOR 1 2 3 4 5 6 7 8

The display shows UNLOCK DOOR 1 2 3 U 5 6 7 8

This indicates that all doors are in a normal state, except for Door 4, which is unlocked.

4.Press [ESC] to leave this sub-function, or enter another door number to unlock.

2.9.5Secure Door?

1.To secure a door to prohibit access to users regardless of their access authority level, at the CYCLE DOOR? prompt, press [PREV] to enter the SECURE DOOR? sub-function.

2.	The display shows SECURE 1 2 3 4 5 6 7 8 if all doors are
	in a normal state and available. If a door is not in a normal
	state, the number of the door is replaced with a symbol
	indicated in Table 3 on page 15.
16	Bosch Security Systems, Inc. 2/07 F01U063791-01