Bosch Appliances GV2 owner manual 2.9.3Cycle Door?

GV2 Series Control Panels Owner's Manual Supplement

7.The first sub-function that appears is CYCLE DOOR?. You can cycle through the three sub-functions by pressing [PREV] and [NEXT].

On a D1260 Keypad

1.Ensure that the display shows idle disarmed text.

2.Press the [COMMAND] key. The display shows SYSTEM COMMAND.

3.Press [4] and [6].

You can use the function list in place of steps 2 and 3 to start this function.

1.Press the [Menu>] soft key to enter the function list.

2.Press [Next>] repeatedly until you reach the DOOR CTRL? prompt.

3.Press the [Door Control ? >] soft key.

4.All authorized door control function sub-functions are listed. Press the corresponding soft key to enter the sub-function.

2.9.3Cycle Door?

1.To unlock an access door briefly and allow a person into an area, press [ENT] at the Cycle Door? prompt.

The display shows CYCLE 1 2 3 4 5 6 7 8 if all doors are in a normal state and available. If a door is not in a normal state, the number of the door is replaced with one of the symbols indicated in Table 3.

Table 3: Key to Symbols

Symbol Description

---Door is not active, not in scope, or user does not have access level authority

CDoor is timed door sequence

UStrike and shunt are latched active (held open)

X Strike and shunt are deactivated (secured)

PThere is a problem with the door; call your security company

Bosch Security Systems, Inc. 2/07 F01U063791-01 15