GV2 Series Control Panels Owner's Manual Supplement
2.8Access Level Control
2.8.1Description
Use this function to manually enable or disable access authority levels assigned to users. This function can be used to disable a user’s access level temporarily instead of deleting and adding the user.
I have this feature.
I do not have this feature.
2.8.2Using ACCESS LEVEL CTL?
On a D1255 Keypad
1.Activate the door’s custom functions. Refer to Section 2.7.2 Using Door Activated Custom Functions on page 12.
2.Ensure that the display shows idle disarmed text.
3.Press the [MENU] key to enter the function list, then press [NEXT] repeatedly until you reach the CHANGE LEVEL CTL? prompt. Press [ENT].
4.ACCESS LEVEL CTL appears, indicating that you are affecting the authority levels of cards or tokens and not passcodes. Press [ENT].
5.ENTER LEVEL: appears. Enter the access authority level number and press [ENT].
6.If the access level is currently disabled, LEVEL # ENABLE? appears. If the access level is currently enabled, LEVEL # DISABLE? appears. Press [ENT] to accept the choice.
7.ENTER LEVEL: appears again. Press [ESC].
On a D1260 Keypad
1.Activate the door’s custom functions. Refer to Section 2.7.2 Using Door Activated Custom Functions on page 12.
2.Ensure that the display shows idle disarmed text.
3.Press the [Menu>] soft key to enter the function list. Then press [Next>] repeatedly until you reach the CHANGE LEVEL ? prompt.
Bosch Security Systems, Inc. 2/07 | 13 |
