ENGLISH
100100
Maintenance
✤At the end of a recording you must remove the power source.
✤Leaving the Lithium Ion Battery pack on the camcorder can reduce the life span of the battery.
1. Slide the TAPE EJECT switch in the direction of the arrow.
■Opening the cassette door ejects the tape automatically.
■Please wait while the tape is completely ejected.
2. After removing the tape, close the door and store the camcorder in a dust free
environment.
■Dust and other foreign materials can cause block-shaped noise or jerky images.
3. Set the power switch to the OFF mode.
4. Disconnect the power source or remove the Lithium Ion Battery Pack.
■Hold down the BATTERYRELEASE button and slide the battery pack in the direction of the arrow.
After finishing a recording
12
34
00792B SCD903 USA (64~109) 5/14/04 10:47 AM Page 100