
ENGLISH
Advanced Recording
Recording Superimposed images on a tape
✤Insert a tape for recording into your camcorder.
✤Insert a Memory Stick with still images recorded into your camcorder.
1.Set the camcorder to CAMERA mode.
2.Press the MENU button.
■ The menu list will appear.
3.Move the MENU SELECTOR to highlight CAMERA and push the MENU SELECTOR.
4.Select MEMORY MIX from the submenu and push the MENU SELECTOR.
CAM MODE
INITIAL | PROGRAM AE |
CAMERA | |
A/V | WHT. BALANCE |
MEMORY | D.ZOOM |
VIEWER | EIS |
| DSE SELECT |
| MEMORY MIX |
| FLASH SELECT |
5.Move the MENU SELECTOR to select the desired MEMORY MIX mode and push the
MENU SELECTOR.
■Your currently recording image is combined with the last recorded image.
6.Press the (REV)/
(FWD) buttons to select the still image you want to superimpose.
7.Move the MENU SELECTOR to adjust the mix level.
■Push the MENU SELECTOR to confirm the MEMORY MIX mode.
CAM MODE
CAMERA SET
PROGRAM AE
WHT. BALANCE
D.ZOOM
EIS
DSE SELECT
MEMORY MIX
FLASH SELECT
8. | To exit, press the MENU button. |
|
| CAM MODE | STBY | |
| ■ Your selected MEMORY MIX mode is flashed in the display. |
| CAMERA SET | [07/07] | ||
|
| MEMORY MIX |
| |||
9. | Press the MEMORY MIX button. |
|
| |||
|
|
|
|
| ||
| M.CHROMA |
| ||||
| ■ The still image is superimposed on the moving image. |
| M.LUMI |
| ||
|
| C.LUMI |
| |||
|
|
| M.OVERLAP |
|
■Each time you press the MEMORY MIX button, your selection is activated (display lights continuously) or deactivated (display flashes).
10.Press the START/STOP button to start recording.
■The superimposed images are recorded onto the tape.
Note
■If you change the position of the power switch, you must select a still image for MEMORY MIX again.
52