ENGLISH

Advanced Recording

DEMONSTRATION

Demonstration automatically shows you the major functions that are included with your camcorder so that you may use them more easily.

The DEMONSTRATION function may only be used in the CAMERA mode without a tape inserted in the camcorder.

The demonstration operates repeatedly until the DEMONSTRATION mode is switched OFF.

1.Set the camcorder to CAMERA mode.

(The mode switch must be in the TAPE position.)

2.Press the MENU button.

The menu list will appear.

3.Move the MENU SELECTOR to highlight INITIAL and push the MENU SELECTOR.

4.Select DEMONSTRATION from the submenu and push the MENU SELECTOR.

5.To activate the DEMONSTRATION, set DEMONSTRATION ON.

Press the MENU button to quit the menu.

The demonstration will begin.

6.To end the DEMONSTRATION, set the DEMONSTRATION to OFF.

Notes

CAM MODE

INITIAL

CLOCK SET

CAMERA

WL. REMOTE

A/V

BEEP SOUND

MEMORY

SHUT. SOUND

VIEWER

LANGUAGE

 

DEMO

CAM MODE

INITIAL SET

CLOCK SET

WL.REMOTE

BEEP SOUND

SHUTTER SOUND

LANGUAGEENGLISH DEMONSTRATION

The DEMONSTRATION function only works without a TAPE installed.

The DEMONSTRATION mode is automatically activated when the camcorder is left idle for more than 10 minutes after switching to the CAMERA mode (no tape is inserted in the camcorder).

If you press other buttons (FADE, BLC, PHOTO, EASY Q) during the DEMONSTRATION mode, the DEMONSTRATION stops temporarily and resumes 10 minutes later if you do not operate any other functions.

42

Page 46
Image 46
Samsung SCD903 manual Demonstration