Samsung SCD903 manual System requirements, Recording with a DV connection cable

ENGLISH

IEEE 1394 Data Transfer

●System requirements

■CPU : faster Intel® Pentium III™ 450Mhz compatible.

■Operating system : Windows® 98SE, ME, XP, Mac OS (9.1~10.2)

■Main memory : more than 64 MB RAM

■IEEE1394 add-on card or built in IEEE1394 card

Recording with a DV connection cable

1.Set the power switch to PLAYER mode.

2.Connect the DV cable (not supplied) from the DV jack of the camcorder to the DV jack of the other DV device.

■Make sure that DV (DV IN) appears on the screen.

3.Press the START/STOP button to begin REC PAUSE mode.

■PAUSE is displayed on the OSD.

4.Start playback on the other DV device while you monitor the picture.

5.Press the START/STOP button to start recording.

■If you want to pause recording momentarily, press the START/STOP button again.

6.To stop recording, press the (STOP) button.

USB DV

Notes

■When using this camcorder as a recorder, the pictures that appear on a monitor may seem uneven, however recorded pictures will not be affected.

■Operation is not guaranteed for all computer environments recommended above.

77