76 _Machine status and advanced setup

OPTIONAL SERVICE
When you want to add the optional features for this machine, you have to
install the optional kit and then set the machine to enable and activate those
features. Follow the next steps to enable those features.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter
password and press OK.
3. Press the Setup tab > Optional Service.
PRINTING A REPORT
You can print a report on the machine's configuration or font list, etcetera.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter
password and press OK.
3. Press the Print/Report tab.
Authentication
Mode
(Continue)
Foreign Device
Interface
(Continue)
•Print Job Control: When it is
enabled, the both computer
printing and copying are
possible since the credit
remains. With Disable, only the
copy printing job needs the
credit. (which means a
computer printing a report or a
fax job needs no credits)
•Inhibit Services: When no
credit is left, the machine
disables the copy job only with
Copy Only. With All Services,
scanning service and copy job
are disabled.
•Internal Credits: It is used
when you cancel the job or
when the job is cancelled by the
device due to insufficient credits
(coin) or is canceled by user’s
request. If you select Enable,
the machine deposits a credit
equal to the number of sheets
that did not print out correctly,
then it prints next job for free
(for the amount deposited).
With Disable, even if you
cancel the printing job, the
machine includes jammed
paper in the count and the cost
of printing.
•Image Counter: Depends on
whether the machine counts
blank white pages.
No
Authentication
Mode
It disables Authentication Mode.
Change Admin. Password You can change the password for
the Admin Setting authentication.
OPTION OPTION DESCRIPTION
OPTION DESCRIPTION
N/W Scan If you are not using the network scan feature,
select Disable, then the Scan icon on the display
will be grayed out.
Analog Fax After installing the fax kit, select this option
Enable
to use this machine as a fax machine.
On Demand Image
Overwrite You can set the machine to delete previous job
information on HDD as you store new job
information. Set this option to
Enable
, go to the
General tab > On Demand Overwrite, press
Start in the display to start the overwriting job.
Immediate Image
Overwrite If you select
Enable
, the machine renews the HDD
memory when you save new job on it.