DRAINING WATER WITHOUT USING THE WATER TANK

You can use the dryer without using the water tank by following the procedures below.

CONNECTING THE DRAIN HOSE

The Dryer can pump the condensed water outside of the DRYER directly with dain hose provide.

The procedures to connect the drain hose are as follows.

INSTALLING YOUR DRYER

1. Disconnect the drain hose A .

A

2.

Connect the drain hose

A

to the other hole.

 

 

 

 

 

 

 

A

3.

Connect accessory hose(long drain hose)

B to the hole

 

 

 

 

 

 

B

 

next to the hole that is connected to drain hose

A .

 

When connecting hose

B , take care that the height of

CAUTION

the hose does not exceed 90cm.

 

 

 

After connecting the drain hose, you can directly drain

 

 

the condensed water via the drain-outlet through the

 

 

connected drain hose or through the washstand or the

 

 

drain-outlet of the washstand.

 

 

English - 15

SDC16809-02885Q-03_EN.indd Sec3:15

2014-08-22 ￿￿ 5:06:15

Page 15
Image 15
Samsung SDC16809/YL manual Draining Water Without Using the Water Tank, Connecting the Drain Hose, To the hole