English - 64
Preparing before installing Wall- Mount on the wall
1. Install Wall Mount with the torque range of 15kgf·cm or less. Make sure that parts can be damaged if the torque is out of the
specied range.
2. Accessory Kit contains Holder–Ring [①] for installing other company’s Wall-Mount on Samsung TV. (Case B)
Case A. Installing SAMSUNG Wall-Mount Case B. Installing other company’s Wall-Mount
Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang
over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all
safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety
purposes, as follows.

To avoid the TV from falling:

1. Put the screws into the clamps and rmly fasten them onto the wall. Conrm that the screws have been rmly installed onto
the wall.
You may need additional material such as an anchor depending on the type of wall.
Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.
2. Remove the screws from the center back of the TV, put the screws into the clamps, and then fasten the screws onto the TV
again.
Screws may not be supplied with the product. In this case, Screws are sold separately.
3. Connect the clamps xed onto the TV and the clamps xed onto the wall with a strong string and then tie the string tightly.
Install the TV near to the wall so that it does not fall backwards
.
It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.
Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any
doubt about the security of your connections,contact a professional installer.
N
N
N
N
N
N
경고 주 의
경고 주 의
Securing the TV to the Wall
Wall Wall
BN68-01757A-Eng.indb 64 2008-09-24 오전 11:09:37