Samsung SF-530 Series manual Enter the desired code 0 to 9 on the number keypad

•STAMP RCV. NAME—Allows the machine to automatically print the page number, and the date and time of the reception at the bottom of each page of a received document.

Select ON to enable. Select OFF to disable.

•RCV. START CODE — The remote receive start code allows you to initiate fax reception from an extension phone plugged into the EXT. jack on the back of your machine. If you pick up the extension phone and hear fax tones, enter the remote code and the machine will start receiving. The password is preset to ‘ 9 ’ at the factory.

Enter the desired code 0 to 9 on the number keypad.

•ECM MODE (Error Correction Mode) — This mode compensates for poor line quality and ensures accurate, error-free transmission with another ECM-equipped facsimile machine. If the line quality is poor, transmission time may be increased when the ECM is enabled.

Select ON to enable. Select OFF to disable.

•CALLER ID — When you receive a call, you can see the number of the person calling you if it is available from the network on which the call was made. (This option may not work when connected to a PABX.)

Select ON to turn on caller ID display. Select OFF to disable.

•JUNK FAX BARRIER — With this feature set to ON, the system will only accept a fax sent from the remote station of which the fax number is stored in memory as a one-touch or two-digit speed dial number. This feature is useful for blocking any unwanted fax.

Select ON to turn this feature on. You can receive only from the registered stations.

Select OFF to turn this feature off. Anybody can send you a fax.

Notes:

•This feature needs the number reported by the remote fax to be an exact match to a one-touch or speed dial number in the SF-530 Series.

If you have a problem receiving faxes, turn this feature off.

Stand-alone Fax 3.5