Samsung SF-530 Series manual Fax Problems, Pressed Start/Enter?

Fax Problems

Symptom	Cause and Solution
The machine is not working,	• Unplug the power cord and plug it in again.
there is no display and the	• Check that your socket is active.
buttons are not working.
No dial tone.	• Check that the phone line is connected properly.
	• Check that the phone socket in the wall by plugging in
	another phone.
The numbers stored in the	• Make sure that the numbers are stored in the memory
memory do not dial correctly.	correctly.
	• Print a Phonebook list. See page 3.38.
The document does not feed	• Make sure that the document is not wrinkled and you
into the machine.	are putting it in correctly. Check the document is the
	right size, not too thick or thin.
	• Make sure that the cover is firmly closed.
You cannot receive faxes	• The FAX mode should be selected.
automatically.	• Is there paper in the machine?
	• Check if the display shows ‘MEMORY FULL.’
Your machine cannot receive	• Did you hang up the handset of the machine before you
faxes manually.	pressed Start/Enter?
Your machine will not send	• Make sure that the document is loaded face down.
anything.	• ‘TX’ should show up on the display.
	• Check the other machine you are sending to, to see if
	it can receive your fax.

Troubleshooting 6.7