Samsung SHR-6163P, SHR-6080P, SHR-6160P, SHR-6082P, SHR-6162P, SHR-6164P Default Setting, Management

appendix

DEFAULT SETTING

This returns the factory default settings.

The settings are made as follows;

•Use System/Load Factory Default in MENU

•In Live mode, press and hold down [MODE] and then [PTZ] on the front panel for 6 seconds to reset the settings.

The default settings are based on SHR-6164.

Category		Details		Factory Default
			Date	YYYY-MM-DD
			Time Format	24 hours
	Date/Time/Language	Date/Time/Language	Time Zone	GMT
Time Synchronize			OFF
			DST	OFF
System Settings			Language	English
		Admin	ID	admin
	Permission		New Password	4321
	Management	Setting	Restricted Access	All
			Auto Logout	3 Min
	System Management	System Information	Broadcast Format	NTSC/PAL
			Video	ON
		Camera	Audio	OFF
			CH Name	CAM 01 ~ CAM 16
			SEQ-Dwell Time	5sec
	Camera
		PTZ	ID	Camera No.
			Protocol	None
			Brightness	50
		Screen Setup	Contrast	50
			Color	50
Device			Check Alarm Output Port	OFF
	Storage Device	HDD Alarm	Duration	OFF
			Replace Alarm Output Port	OFF
			Duration	OFF
		Baudrate		9600
		Parity		None
		Data		8
	Remote Device
		Stop bit		1
		Transfer Type		Half Duplex
		System Keyboard		OFF
		Remote Control		ON(00)

100_ appendix