Samsung SM-T520NZWAXAR Touch Wi-Fi Direct, Touch the OFF / ON button to turn Wi-Fi ON

–Wi-Fi timer: Specify the Starting time and the Ending time for Wi-Fi to be automatically connected.

–Install certificates: Install authentication certificates.

–MAC address: View your device’s MAC address, which is required when connecting to some secured networks (not configurable).

–IP address: View your device’s IP address (not configurable).

•WPS push button: Set up a connection to a WPS (Wi-Fi Protected Setup) router or other equipment.

•WPS PIN entry: View the PIN used by your tablet to set up a PIN-secured connection to a Wi-Fi router or other equipment (not configurable).

•Help: Learn about setting up and using Wi-Fi networks, and other settings.

Wi-Fi Direct

Wi-Fi Direct allows device-to-device connections so you can transfer large amounts of data over a Wi-Fi connection. These devices must be enabled for Wi-Fi Direct communication. This connection is direct and not via a hot spot or Wireless Access Point (WAP).

1.From a Home screen, touch ➔ Settings ➔ Connections tab ➔ Wi-Fi.

2.Touch the OFF / ON button to turn Wi-Fi ON .

3.Touch Wi-Fi Direct.

Your device begins scanning for other devices enabled with Wi-Fi Direct.

4.Enable Wi-Fi Direct on the target device.

5.In the list of available devices, touch the target device.

– or –

If you want to connect to more than one device, touch Multi connect and touch each device to which you want to connect that supports Multi-connect. Touch Done.

78