3-7) NETWORK SETTING function and setting method

Static

DHCP

ADSL (PPPoE)

Function: Allows users to select the STATIC (fixed) IP, DHCP, PPPoE of Setting.

Setting method: Move to #7, NETWORK SETUP MENU by using /KEY at SETUP MENU, then press the ENTER SWITCH to display the OSD as shown in the figure below.

(The figure shows the initial setting status)

06/01/03

 

13:14:00

NETWORK SETTING

 

1. NETWORK ACCESS

STATIC.../DHCP.../PPPoE...

2. HTTP PORT

00080

NETWORK STATUS

 

IP

ADDR

192.168.1.200

GATEWAY

192.168.1.65

SUBNETMASK

255.255.255.0

DNS 1

 

168.126.63.001

DNS 2

 

168.126.63.002

MAC ADDR

00:30:6f:ff:00:00

 

 

 

MOVE TO EACH item by using /KEY, and using / KEY change the set value.

Static IP User

- Constituted by Static IP on the TCP/IP network

1)Move to ‘STATIC...’ by using /KEY at NETWORK ACCESS, then press ENTER SWITCH to set STATIC...

(STATIC : Select in case the network configuration of monitor is fixed IP (Public or Private IP)

06/01/03

 

13:14:00

STATIC ACCESS

 

IP

ADDR

192.168.1.200

GATEWAY

192.168.1.65

SUBNETMASK

255.255.255.0

DNS 1

 

168.126.63.001

DNS 2

 

168.126.63.002

 

 

 

2)Move to IP ADDR / GATEWAY / SUBNETMASK by using /KEY.

3)Press ENTER SWITCH and type in IP ADDR / GATEWAY / SUBNETMASK respectively.

4)DNS 1 and DNS 2 will be automatically set to DNS as shown above.

Use / KEY to change it.

Eng-35

Page 35
Image 35
Samsung SMO-151QN/XAAV Network Setting function and setting method, Constituted by Static IP on the TCP/IP network, Eng-35