Samsung SMX-F33BN, SMX-F34SN Connecting a Power Source, Inserting the battery pack, English14

preparation

CONNECTING A POWER SOURCE

•There are two types of power source that can be connected to your memory camcorder.

•Do not use provided power supply units with other equipment.

-The battery pack: used for outdoor recording.

-The AC power adaptor : used for indoor recording and playing back. ➥page 21

Battery Pack installation / ejection Insert

It is recommended you purchase one or more additional battery packs to allow continuous use of your memory camcorder.

Inserting the battery pack

1.Slide and open the battery slot cover as shown in the fi gure.

2.Insert the battery pack into the battery slot until it softly clicks.

•Make sure that the SAMSUNG logo is facing up while the set is placed as shown in the fi gure.

3.Slide and close the battery slot cover.

CARD

Ejecting the battery pack

1. Slide and open the battery slot cover and push the battery lock. Eject

•Gently push the battery lock in the direction as shown in the fi gure to eject

the battery out.

2. Pull the ejected battery out in the direction as shown in the fi gure.

3. Slide and close the battery slot cover.

[BATT. RELEASE] Switch

CARD

•Store the battery pack separated from the memory camcorder while not in use.

•It is recommended to prepare an additional battery pack for prolonged outdoor use.

•Contact your nearest Samsung Electronics Service Center for purchasing additional battery pack.

CARD

English_14