Samsung SMX-F33LN Set Beep Sound to On, Recorded movie starts/stops. This is not an error

troubleshooting

Recording

Symptom		Explanation/Solution
When the screen is exposed to the
direct sunlight during recording, the	•	Do not leave the memory camcorder with the LCD screen exposed to direct
screen becomes red or black for		sunlight.
an instant.
During recording, the date/time	•	"Date/Time" is set to off. Set the "Date/Time" to on. ➥page 86
does not display.
	• Set "Beep Sound" to "On".
The beep sound is not heard.	•	Beep sound is temporally off while recording movies.
	•	When the AV cable is connected to the memory camcorder, the beep
		sound will automatically turn off.
There is a time difference between
the point where you press	•	On your camcorder, there may be a slight time delay between the point
Recording start/stop button and		when you press Recording start/stop button and the actual point where
the point where the recorded movie		the recorded movie starts/stops. This is not an error.
starts/stops.
	• The internal temperature of your camcorder is unusually high. Turn off your
The recording stops.		camcorder and leave it for a while in a cool place.
	•	Your camcorder is damp and moist inside (condensation). Turn off your
		camcorder and leave it for about 1 hour in a cool place. ➥page 102
	• Set your memory camcorder to Photo Record mode. ➥page 22
You cannot record a photo image.	•	Release the lock on the write-protection tab of the memory card if any.
	•	The storage media is full. Use a new memory card or format the storage
		media. ➥page 83 Or remove unnecessary images. ➥page 75

English_113