Samsung SMX-F33BN, SMX-F34SN Pressing the Recording start, The recording stops automatically

Recording

Symptom		Explanation/Solution
	•	Press the MODE button to set Movie Record mode ( ).
	• There is not enough free space to record on the built-in memory (8GB (SMX-
		F33BN/LN/RN/SN only)/16GB (SMX-F34BN/LN/RN/SN only)) or memory
Pressing the Recording start/		card.
stop button does not start	•	Check if memory card is not inserted or write-protect tab is set to lock.
recording.	•	The internal temperature of your camcorder is unusually high.
		Turn off your camcorder and leave it for a while in a cool place.
	• Your camcorder is damp and moist inside (condensation). Turn off your
		camcorder and leave it for about 1 hour in a cool place. ➥page 102
	• The estimated recording time may vary depending on contents and features
The actual recording time is less		used.
	•	Recording a fast-moving subject increases the bit rate and consequently
than the estimated time.
		the amount of storage space required for the recording, which can lead to a
		shorter available recording time.
	• There is no more free space for recording on the storage media.
		Back up important fi les on your PC and format the storage media or delete
		the unnecessary fi les.
	• If you make a frequent recording or deletion of fi les, the performance of
		the built-in fl ash memory (8GB (SMX-F33BN/LN/RN/SN only)/16GB (SMX-
The recording stops automatically.		F34BN/LN/RN/SN only)) will be deteriorated. In this case, format the built-in
		memory (8GB (SMX-F33BN/LN/RN/SN only)/16GB (SMX-F34BN/LN/RN/SN
		only)) again.
	• If you use the memory card with low writing speed, the memory camcorder
		automatically stops recording the movie images and the corresponding
		message appears on the LCD screen.
When recording a subject
illuminated by bright light, vertical	•	The memory camcorder is unable to record these levels of brightness.
lines appear.
		English_112