Samsung SNB-7000 user manual WDR Setup, Select Backlight Set Mode to WDR Specify the WDR level

setup screen

WDR Setup

It displays a sharp image of the objects in a scene where both bright and dark areas exist.

1.Select <Backlight>.

2.Set <Mode> to <WDR>.

3.Specify the <WDR level>.

M WDR is available only if <Megapixel Mode> is set to <2-Megapixel>.

If WDR mode is activated, you cannot change the shutter type.

Exposure Setup

You can adjust the exposure level of the camera.

1.Select <Exposure>.

2.Select each item and set it properly.

•Brightness : Adjust the screen brightness.

•Shutter mode : Adjust the electronic shutter of the camera.

-ESC (Electronic shutter control) : Adjust the shutter speed automatically according to the ambient brightness.

This will be activated if <Lens> is set to <Manual>.

-Manual : Adjust the shutter speed of the camera manually.

-A.FLK (Anti flicker) : This will prevent the screen from flickering.

•Shutter speed : Control the shutter speed manually.

•SSNR3 : Specify the use of noise reduction.

•SSNR3 level : Adjust the noise reduction level.

•Sens-up mode : Automatically senses the darkness level at night or in a low contrast scene and extends the accumulation time accordingly for a bright and sharp image.

If you set the shutter mode to Manual/A.FLK, SENS-UP mode will be deactivated.

The greater the video accumulation factor is, the brighter the screen is but the afterimage of a moving object grows accordingly.

50_ setup screen