![](/images/new-backgrounds/1249055/249055127x1.webp)
setup screen
5.Specify an operation that will perform if an alarm occurs.
•Alarm output : Select whether to set the alarm output if an alarm is incoming, and specify the alarm output time.
•
•FTP sending : Specify the use of FTP transfer in the alarm input setup.
•Record : Specify the use of recording in the alarm input setup.
•Goto Preset : Moves to the specified preset location when setting the alarm input.
Only if the camera pan/tilt receiver is installed, GoTo Preset is available.
6.When done, click [Apply ( )].
Motion detection
1.From the Setup menu, select the
<Event ( )> tab.
2.Click <Motion detection>.
To set the Motion Detection
1.Specify the use of motion detection.
2.Select a sensitivity level of the motion detection.
3.Place the cursor at a point in the video and drag it to whatever you need.
You can specify up to 4 motion detection areas.
4.Specify the activation time and activation condition.
For more information about <Activation time> and <Action>, refer to “Alarm input”. (page 63)
5.When done, click [Apply ( )].
64_ setup screen