Upgrade / Reboot
1.From the Setup menu, select the
<System ( 
)> tab.
2.Click <Upgrade / Reboot>.
3.Select a desired item and set it appropriately.
•Upgrade : Performs upgrading the system.
•Factory default : Resets the system to the factory default.
-Except network parameter : Reset the other settings except for the interface/ port/DDNS/IP filtering settings.
-All : Resets all settings including the camera settings. (however, the log information will not be reset)
The IP addressing system will be defaulted to DHCP if you reset the camera. If no DHCP server is found, the previous settings will be restored automatically.
•Configuration backup & Restore : Backs up the current system settings before performing the restoration process. The system is automatically restarts after backup or restoration.
•Restart : Restarts the system.
To perform the upgrade
1.Click [Upgrade].
2.Click [Browse] and specify a file to upgrade.
3.Click [Send].
4.The “Upgrade” dialog appears where the progression will be shown in the bottom.
M If you forcibly terminate the upgrade process, upgrade will not be completed properly.
● SETUP SCREEN
