Samsung SNB-7001, SNB-5001 user manual Network connection and setup

network connection and setup

CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM

INTERNET

DSL/Cable Modem

External Remote PC

Camera

DDNS Server

(Data Center, KOREA)

1.Use the cross LAN cable to connect the network cable directly to your PC.

2.Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

3.Use the Internet browser to connect to the camera.

4.Move to [Setup] page.

5.Move to [Network] – [DDNS] and configure the DDNS settings.

6.Move to [Network] – [Interface], and set the network type to [DHCP].

7.Connect the camera, which was removed from your PC, directly to the modem.

8.Restart the camera.

M For registering the DDNS settings, refer to “Registering with DDNS”. (page 49)

For configuring the DDNS settings, refer to “DDNS”. (page 48)

For setting the network type, refer to “Interface”. (page 47)

20_ network connection and setup