NETWORK SETUP
Interface
1.From the Setup menu, select the
<Network ( 
)> tab.
2.Click <Interface>.
3.Set the <Interface> and <IPv6 setup> as necessary.
•IP type : Select an IP connection type.
-Manual : Specify the IP address, Subnet mask, Gateway, DNS1, and DNS2.
-DHCP : Specify the DNS1 and DNS2.
-PPPoE : Specify the DNS1, DNS2, ID and Password.
If you set it to <Manual>, you should specify the IP, Subnet mask, Gateway, DNS 1 & 2 manually.
•MAC address : Shows the MAC address.
•IP address : Displays the current IP address.
•Subnet mask : Displays the <Subnet mask> for the set IP.
•Gateway : Displays the <Gateway> for the set IP.
•DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.
•Default : Use the default IPv6 address.
•DHCP : Display and use the IPv6 address obtained from the DHCP server.
•Manual : Enter IP address and gateway manually and use it.
4.When done, click [Apply ( 
)].
J The IP addressing system will be defaulted to DHCP. If no DHCP server is found, the previous settings will be restored automatically.
● SETUP SCREEN
