3.In the <Address> pane, provide the necessary information.
•MAC (Ethernet) Address : The MAC (Ethernet) address of the applicable camera will be set automatically so you don't need to input it manually.
M You can configure the static IP settings only if the DHCP checkbox is unchecked.
If not using a Broadband Router
For setting <IP Address>, <Subnet Mask>, and <Gateway>, contact your network administrator.
4.In the <Port> pane, provide necessary information.
•HTTP Port : Used to access the camera using the Internet browser, defaulted to 80. Use the spin button to change the HTTP Port value.
•VNP Port : Used to control the video signal transfer, defaulted to 4520.
5.Enter the password.
This is the login password for the “admin” user who accesses the camera. The default password is “4321”.
J The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.
Note that the security and other related issues caused by the unchanged password shall be responsible for the user.
If you want to change the password, refer to “Administrator Password Change” of the user setup. (page 63)
6.Click [OK].
Manual network setup will be completed.
● NETWORK CONNECTION AND SETUP
English _25
