overview
12_ overview
Rear Side
Item Description
Video Out Port Video signal output port connected to the monitor.
System, Power
Indicators
SYSTEM
ON: The camera is turned on and connected to the network
properly.
Blinking: During DDNS setup, or in case of setup failure, or
in a state of unstable network connection
OFF: When the system is rebooting, or turned off
POWER ON: While the power is on
OFF: If the power is off
Reset Button Resets the camera settings to the default. Press and hold it for about 3
seconds to turn off the system indicator and restart the system.
Power Port Used to plug the power cable.
Network Port Used to connect to the Network cable.
I/O Port
ALARM IN
1,2 Used to connect the alarm input signal.
GND Used for earth-grounding.
ALARM OUT
1,2 Used to connect the alarm output signal.
SYSTEM POWER
RESET
NETWORK
GND
1 2 3 4 5
VIDEO
AC 24V
LINK
ACT
DC 12V
1,2 : ALARM IN 1,2
3 : GND
4,5 : ALARM OUT 1,2