setup screen
EVENT SETUP
To set the event transfer function
You can set the FTP/email server (SMTP) to transfer the alarm images present in the camera, in case an alarm event occurs.
Select <Event> - <Transfer setup>.
The Image transfer setup window appears.
M For more information on commercial SMTP services, contact the SMTP service provider.
To test the FTP transfer
Click [Test].
This will test if the image is transferred to the specified FTP server properly.
When the test on the FTP server connection and transfer is done, a message of
<( Verified )> will be displayed.
You will see an error message if the test fails. If this is the case, check the FTP server status or the settings again.
yFTP transfer : With this, you can transfer alarm images to the FTP server. If the initial FTP server setting and the connection status are not verifi ed, the <( Not verified )> message appears.
-Use passive mode : Select this option when the passive mode connection is inevitable due to the fi rewall or FTP server setting.
-FTP server address : Enter the IP address of a FTP server to which an alarm image will be transferred.
52_ setup screen
