how to use osd menu
If Iris is set to Manual and Shutter Speed is set to ESC, Shutter Speed should have highest priority.
If Shutter Speed is set to A. Flicker, to remove Flicker, Shutter Speed should be set to 1/100 sec. for NTSC and 1/120 for PAL.
•AGC [OFF/NORMAL/HIGH]Enhances image brightness automatically in case that luminance level of image signal is too low.
•DNR [OFF/LOW/MIDDLE/HIGH]Enhances images by deducting noises when gain level of images is too high.•It is possible to set up the maximum number of frames piled up one on another by Slow Shutter function.
SYSTEM SETUP
SYSTEM SETUP
<RELAY TYPE> <PASSWORD>
<SET HOME POSITION> <SET NORTH DIRECTION>
LANGUAGE ENGLISH <FAN/HEATER SETUP>
BACK
EXIT
•SYSTEM SETUP
You can set up RELAY TYPE, PASSWORD, HOME POSITION, NORTH DIRECTION, LANGUAGE.
M <FAN/HEATER SETUP> menu is only available in C7225 model.RELAY TYPE SETUP
RELAY1 NORMAL OPEN
BACK
EXIT
EDIT PASSWORD |
| |
[█ | ] |
|
| ||
1234567890 | OK | |
ABCDEFGHIJ | CANCEL | |
KLMNOPQRST |
| |
UVWXYZabcd | DISABLE | |
efghijklmn |
| |
opqrstuvwx |
| |
|
You can defi ne 4 characters long password. If this function is set to ENABLE, it is required to type this password whenever to enter OSD MENU.
It is noted that DEFAULT PASSWORD : “4321”36 – 10x Network Mini Smart Dome Camera