setting static ip

MANUAL NETWORK SETTING

Run the <IP Installer.exe> program and display the camera list found on the screen. For the initial run, the [Auto Set] and [Manual Set] button are all disabled.

1.Select a camera you want from the camera list.• Confi rm the MAC Address of the camera on its base panel.

• Check the MAC address in System Information under the Setup menu of the camera.

• The [Auto Set] and [Manual Set] button are activated.2. Click the [Manual Set] button.

1

• The Manual Set window appears.

 

 

 

 

 

 

2

• The <IP Address>, <Subnet Mask>, <Gateway> and <HTTP

 

 

 

 

 

 

Port> values of the camera are displayed in their default values.

 

 

 

 

 

 

• The password is set to “4321” by factory default.

 

 

 

 

 

 

3. Set up the IP related settings in the <ADDRESS> fi eld.

 

 

 

 

 

 

• <MAC Address>: The MAC Address is automatically

3

 

 

 

 

 

 

 

 

 

 

 

displayed. No additional setting is required.If using an IP router :

• <IP Address>: Set it according to the private IP address range provided by the IP Router.

ex) 192.168.1.2~254, 192.168.0.2~254, or 192.168. XXX.2~254

• <Subnet Mask>: The IP Router’s <Subnet Mask> becomes camera’s <Subnet Mask> value.

• <Gateway>: The IP Router’s <Local IP Address> becomes camera’s <Gateway> value.

If not using an IP router :• For the <IP Address>, <Gateway> and <Subnet Mask> settings,
contact your network administrator.

 

 

 

 

M For the menu location of Internet Connection Type or DHCP selection, refer

 

 

 

 

3

to the IP router’s documentation.

 

 

46 – 10x Network Mini Smart Dome Camera