how to use osd menu

SET HOME POSITION

SET NORTH DIRECTION

MOVE TO TARGET POSITION

MOVE TO TARGET POSITION

[ENTER : SELECT]

[ENTER : SELECT]

0/0/x1/N

0/0/x1/N

•SET HOME POSITION

HOME position means the origin of PAN angle calculation. The value of PAN angle displayed on the screen is based on this HOME position.

By using Joystick, move the camera to the desired position and press ENTER.It is noted that Home is not effective to Tilt angle.

If you change the location of Home position, all horizontal locations of functions such as preset, pattern, scan, auto pan, and privacy zone mask will be shifted based on changed Home position.

If there are no setup for those functions like Preset, Pattern, Auto Pan and Scan, Camera will automatically move to Home position after rebooting.

If Power Up Action is set to be ON, camera will continue the function which is executed lastly after rebooting.

* Set Home Position?

When you replace the camera block or the orientation of camera is changed due to maintenance operations, it is very diffi cult to maintain same pan orientation. Therefore, all function data depending on pan orientation such as preset, pattern, scan, auto pan, and privacy zone mask are not useful any more accordingly. However, even in this case, you can reuse the data if you redefi ne Set Home Position on the previous Home position. It is recommendable to memorize the target scene of current Home position.

•SET NORTH DIRECTIONYou can set up North direction.

By using Joystick, move the camera to the desired NORTH position and press ENTER key.

The direction will be displayed in the screen [PAN AXIS / TILT AXIS / ZOOM / DD]

DD is direction and will be displayed from: [N/NE/E/SE/S/SW/W/NW]•LANGUAGEYou can select a preferred Language of OSD display from 7 choices.[ENGLISH/ ESPAÑOL/ FRANÇAIS/ DEUTSCH/ ITALIANO/ РУССКИЙ/ PORTUGUÊS]After selecting a language, press the ENTER key.

FAN/HEATER SETUP

 

FAN RUN TEMP

40°C

HEATER RUN TEMP

5°C

BACK

EXIT

•FAN RUN TEMPAbove this temperature, the blower fan will start automatically.[Range: 30°C ~ 80°C (86°F ~ 176°F)]•HEATER RUN TEMPBellow this temperature, the Heater will be tuned on automatically.[Range: -10°C ~ 20°C (14°F ~ 68°F)]FAN and HEATER are only available in C7225 model.

English – 37