setup tool

❖User ID
•Enter a user account ID to connect to login the FTP server.
❖Password
•Enter a user account password to login the FTP server.
❖Test

•To test FTP transmission, Click [Test] button. Connect to the confi gured FTP server and conduct image transmission test automatically.

When the FTP server connection and transmission tests are complete, the <Verified> message will be displayed.

If the test fails, an error message appears. In this case, check the FTP server status and the confi gured settings once again.

E-mail(SMTP) Transfer

You can transfer an alarm image through Email. This function supports SMTP Email server only. When the initial SMTP server setting and connection are not verifi ed, the <Not verified> message appears.

❖Use SSL/TLS

•Choose whether SSL/TLS secure e-mail will be used. To use this, corresponding SMTP Server must support SSL/TLS.

❖SMTP Server Address

•Enter the IP address of an SMTP server to be used to send an Email. ex) smtp.hotmail.com

❖Port

•Although SMTP server port is 25 as a default, you can change the port number according to the SMTP server settings.

(Default port number for SSL/TLS is 465.)

❖User ID

•Enter a user account ID to connect to connect the SMTP server.

❖Password

•Enter a user account password to the SMTP server.
❖E-Mail Sender

•Enter the address of the Email sender. If the sender address is incorrect, the Email from the sender may be classifi ed into SPAM mail by the SMTP server and may not be sent.

❖E-Mail Receiver
•Enter the address of the Email recipient.
❖Title
•Enter the title of the Email.
❖Message

•Enter the contents of the Email. An alarm image is attached to the Email as an attached fi le.

❖Test

•To test SMTP transmission, Click [Test] button. Connect to the confi gured SMTP server and conduct image transmission test automatically. When the SMTP server connection and transmission tests are complete, the <Verified> message will be displayed.

If the test fails, an error message appears. In this case, check the SMTP server status and the confi gured settings once again.

RECORD SETUP

❖SD Card

•Enables you to verify data saved on the Micro SDHC memory card and format the memory card itself. It is possible to set to automatically delete movie clips recorded before a certain period of time (e.g. 1 week, 1 month, or 1 year).

English – 63