setting static ip

mANUAl NETWORk SETTING

Run the <IP Installer.exe> program and display the camera list found on the screen. For the initial run, the [Auto Set] and [Manual Set] button are all disabled.

1

Select a camera you want from the

1

 

 

 

 

 

 

 

 

camera list.

 

 

 

 

 

 

 

 

 

Confirm the MAC Address of the camera

 

 

 

 

 

 

 

 

 

on its rear panel.

 

 

 

 

 

 

 

 

 

The [Auto Set] and [Manual Set] button

 

 

 

 

 

 

 

 

2

are activated.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Click the [Manual Set] button.

 

 

 

 

2

 

 

The Manual Set window appears.

The <IP Address>, <Subnet Mask>, <Gateway> and <HTTP Port> values of the camera are displayed in their default values.

The password is set to “4321” by factory default.

3 Set up the IP related settings in the <ADDRESS>field.

<MAC Address>: The MAC Address

printed on the camera rear penal is 3 automatically displayed. No additional

setting is required.

<If using an IP router>

<IP Address>: Set it according to the private IP address range provided by the IP Router.

ex) 192.168.1.2~254, 192.168.0.2~254, or 192.168.XXX.2~254

<Subnet Mask>: The IP Router’s <Subnet Mask> becomes camera’s <Subnet Mask>value.

<Gateway>: The IP Router’s <LAN IP Address> becomes camera’s <Gateway>value.

<If not using an IP router>

For the <IP Address>, <Gateway> and <Subnet Mask> settings, contact your network administrator.

3

22_ Setting Static IP