3.Adjust the camera’s shooting angle as appropriate (left and right) and tighten the screws on the bottom of the bracket.
n` You can also use a coin or
4.Adjust the camera’s shooting angle (top and bottom).
n` Do not put excessive force. Otherwise, it may cause damage to the camera.
` If you use the camera in contact with the base unit, this may cause noise on the video. It is advisable to use the camera in a 5º to 10º tilt.
5.Plug in the power cable and arrange the cables through the bracket holes.
n` When done, remove the protective film from the lens.
Power Supply
n` Makeoperatesureproperly.to use the provided power adaptor. Otherwise, the product may not
`It will take about 1min for the camera to
`When the
