Samsung SNH-1011N, SNH-1011ND n `Match adaptors plug part to the direction of 12 , n `Make both body brackets [UNLOCK LOCK] and wall-mount brackets [ TOP] marks , n `When done, remove the protective film from

10 · English
4. Run the provided adaptor wire through the
groove prepared on the wall-mount bracket.
n `Match adaptor’s plug part to the direction of 12
o’clock.
5. Arrange the wire by using two grooves on the body bracket.
n `Make both body bracket’s [UNLOCK LOCK] and wall-mount bracket’s [▲ TOP] marks
face the same direction.
6. Fix the body bracket by turning it clockwise until it clicks.
7. Connect the adaptor’s plug to the power
terminal on the camera’s rear side.
n `When done, remove the protective film from
the lens.
RESET
DC IN 5V
NETWORK
SAMSUNG SMARTCAM
UNLOCK LOCK
Grooves on the
body bracket
TOP