Registering a New Handset | (Menu |
|
|
The handset supplied with the base unit is already registered as handset 1. Each additional handset you purchase must be registered to the base unit.
1.Press and hold the Paging key on the base for more than 3 seconds. The light is blinking.
2.Press the Menu soft key on the handset.
3.Press the 
soft key repeatedly until System appears, then press the Select soft key. You are asked to enter the PIN code. It is preset to 0000.
4.Enter the PIN code, then press the OK soft key.
5.Press the 
soft key repeatedly until Registration appears.
6.Press the Select soft key. The available bases are displayed. The selected base to which your handset is registered has a check mark on its right side.
7.Select a base by using the 
soft key, then press the Select soft key. Please wait appears for a short time, then the LCD window displays the ID of the base unit.
8.Press the OK soft key.
9.Enter 9234, the Authentication Code , which is preset at factory, then press the OK soft key.
10.When the registration is properly completed, the handset returns to the Standby mode and displays the base number and the handset number.
11.Unplug the power cord and then plug it in again.
Notes:
•If you have registered the handset to several bases, and the base number you select at step 7 is already used for another base, you will be asked to confirm that you want to overwrite. If you press the Yes soft key, the old information is cleared and the base number will be used for your newly selected base. To keep old information, press and hold the 
key to cancel the setting, then start over again with a different base number.
•The time limit for registering a handset to a base is 60 seconds. The registration will be automatically cancelled when this time has elapsed.
•If you fail to register the handset, the handset displays Fail to Register.
54 System | System 55 |
