Selecting Base Manually | Samsung SP-R6100 specification

Base

The SP-R6100 handset may be used with up to four base units. To use the handset with more than one base unit, you must register the handset to each base unit. Refer to ‘Registering a New Handset’ on page 54.

Selecting Base Manually	(Menu 7-1)

You can select a base unit through which you want your handset to operate.

1.In the Standby mode, press the Menu soft key.

2.Press the soft key repeatedly until Base appears, then press the Select soft key.

3.Select Base is displayed. Press the Select soft key.

4.The available bases are displayed. The base to which your handset is registered has a check mark on its right-hand.

5.Press the soft key repeatedly to choose the desired base unit.

6.Press the Select soft key to confirm.

Finding Base Automatically	(Menu 7-2)

With the ‘Auto Find’ feature set to ON, if you are moving around, and lose contact with the base unit, the handset will automatically find the first available base unit among regis- tered bases.

The feature is preset to OFF.

1.In the Standby mode, press the Menu soft key.

2.Press the soft key repeatedly until Base appears, then press the Select soft key.

3.Press the soft key repeatedly until Auto Find appears, then press the Select soft key.

4.The display shows the current setting; OFF or ON. Press

the soft key to choose OFF or ON.

5.Press the OK soft key to confirm.

62 Base

Base 63

Image 32

Samsung SP-R6100 user manual Selecting Base Manually, Finding Base Automatically

Contents

User’s Manual Safety Precautions Important Notices You can use this equipment to make 999, 112 emergency calls Table of Contents Getting Started Checking PartsControl Locations Handset Connecting Lines BasePaging key Lamp Installing Handset Battery Handset uses the rechargeable Ni-MH battery sup- plied Turning the Handset On/Off To turn on the handset when the display is off, press keyCharging the Handset LCD Window Icon Descriptions Choosing Dial ModeUsing Headset General Functions Making a CallOpen the flip cover, and press key. You hear a dial tone To press the key. For details, see If the handset is in the Standby mode with the flip cover Camp On BusyReceiving a Call Open, press key Caller ID Display Last Number RedialTo Dial the Last Number To View and Dial Any of Last 10 Numbers Battery Level Indicator Out of Range IndicatorAdjusting Voice Volume To Erase All Numbers In Redial Memory Adjusting Key Volume Quick Switching to Vibration ModeTone Dial Switchover Registered Recall Using the Index System Using the MenusUsing the Soft Keys Menu Map Call TimeActive Flip Language PhoneBook Storing a Phone Number with a Name MenuEntering a Name À ä å æ Using a Pause Dialling a Number in PhonebookOne-Touch Dialling Two-Touch Dialling By Address Number Searching for Numbers in MemoryBy Name Erasing All Numbers Phonebook Options Received Calls Caller ID Viewing and Dialling a NumberReceived Calls Options Save Book Greeting Message RingGreeting Message Choosing Ring Tone Adjusting Ring Volume Choosing Alert Type To Deactivate a Number’s Unique Ring Tone Unique Ring Tone mode see steps 1 through 3 onUnique Ring Tones for selected calls Menu Settings Ring Delay TimeTone/Pulse Call Time Display Language Selection Base Number DisplayActive Flip System Call BarringTo Set Call Barring Numbers To Deactivate a Specific Call Barring Number Unplug the power cord and then plug it in again Registering a New Handset Intercom Between Handsets Call Transfer Between Handsets Removing a HandsetYou can transfer a call from one handset to another Enter the PIN code, then press the OK soft key Reset Handset Correct the number by using the keyChanging PIN Redials/Received Calls/Phonebook All Erase Ring Tone Tone Display shows the current setting OFF or ON. Press BaseSelecting Base Manually Finding Base Automatically Troubleshooting Specifications Samsung Supreme Service Months WarrantyThis warranty applies to the original purchaser only EPS Limited