System
Up to six handsets can be registered and operated from your base unit. You can register and remove a handset through the System menu. You can also reset the handset to its default configuration.
Call Barring | (Menu |
|
|
It is possible to set the phone to restrict numbers that can be dialled. The phone cannot dial a phone number beginning with the numbers that you specify.
You can set up to 4 different restricted numbers containing up to 4 digits each.
If you turn the feature on, the handset requires a PIN code when the restricted number is dialled. If you fail to enter the correct PINcode three times successively, your phone returns to the Standby mode. If you enter a correct PIN, you can make calls.
Note: You can make an emergency call (112, 999) even when you activate the outgoing call barring option.
To Set Call Barring Numbers
1.In the Standby mode, press the Menu soft key.
2.Press the 
soft key repeatedly until System appears.
3.Press the Select soft key to access the menu. You are asked to enter the PIN code. It is preset to 0000.
4.Enter the PIN code, then press the OK soft key. Call Barring appears.
Note: If you enter the wrong PIN number, the handset returns to the Standby mode.
5.Press the Select soft key to access the Call Barring option. The first barring address containing a restricted number, if already registered, appears.
6.If you want to choose another barring address, select the
desired address by using the 
soft key.
7.Press the Edit soft key.
8.Enter up to
9.If you want to block another number, repeat steps 6 through 8.
To Deactivate a Specific Call Barring Number
You can selectively deactivate the restricted number by erasing the number.
1.In the Call Barring mode (see steps 1 through 5 on opposite
page), use the 
soft key to select the address containing the restricted number you want to deactivate.
2.Press the Edit soft key, then use the 
key to erase the number.
3.Press the OK soft key.
52 System | System 53 |
