Switching Your Television On and Off
The mains lead is attached to the rear of your television.
1Plug the mains lead into an appropriate socket.
➢The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz.
2Press the “ I ” button (On/Off) on the front of the television.
Result: The Standby indicator on the front of the television lights up.
3Press the POWER (
) button on the remote control to switch the television on.
Result: The programme that you were watching last is re- selected automatically.
➢◆ If your television isn’t turned on when the POWER (
) button is pressed, press the SELECT button to check if the “TV” mode has been chosen.
◆If you have not yet stored any channels, No clear picture appears. Refer to “Storing Channels Automatically” on page 22 or “Storing Channels Manually” on page 24.
4To switch your television off, press the “ I ” button (On/Off) again.
TV |
